RCA / Phono / Chinch / Jack cable assemblies
(Swiss Made) à la Carte in house at Gotham Audio
|"ultimative" RCA Hi-End
GAC-1 Ultra (1001-x)
| RCA Hi-End Cable using
our Starquad wires
|Phono / Chinch / RCA
analog GAC-1 (1000-x)
|Guitarcable (1/4" Jack mono)
GAC-1 Ultra (1001-x)
line (12010) Amphenol
also for Video VGA 75 Ohm
using Gotham Connectors
|12010 to RCA
|12010 Stereo to 3.5mm Jack|
+/- 1m You can adjust the desired cable length!
Prices indicated are always per piece with 3 meter length. If you need a pair, please order 2pc. We assemble each cable manually in our own lab in Dietikon. Allow a few days delivery delay. Some stock available for immediate shipment. We can only invoice full meters but you can ask your cable per cm specifyed. Therefore 1.50 meter would be charged like 2.00 meter. We will confirm/quote correct price/delivery after receipt of your inquiry/order.
No minimum Order. We are not part of EC, carefully check possible import fees and local VAT. Euro Prices are w/o VAT.
simple order per email here: 7.70 % Swiss VAT included in CHF Sales Price!
No VAT included in Euro prices. Ex works Dietikon Switzerland. Packing and crate included.
You can collect your order here w/o any shipping fees by appointment.
please ask for a quotation here: (link)
Please indicate your address and details, indicate product and quantity and requested delivery date.
Balanced XLR wiring instruction:
Pin1= shields, Pin2= brown (Signal+), Pin3= white (Signal -).
Should space not allow to solder all strands of the many shields, you can put only each a few strands of each layer of the shields to ground Pin 1. Cut away any spare strands from the shields and secure that no loose strands are hanging around. Use a shrinking tube to avoid short ciricuits. We do not recommend to put any ground to the body shell on either side of your XLR line. The connector shell will get to ground once pluged into a recepacle.
Having your shields put on the connectors shell is dangerous! Imaginge, a loose cable can make contact with another loose cable connector having a diffrent ground potential. So the metal connector is conductive and shall not carry your audio ground used on the shieldings of your audio signal. It can interfere with other "grounds" such as video, data of power grounds, which are potentially different! So keep "grounds" seperate!
RCA/Phono/Jack unbalanced wiring:
Many clients use our 2 conductor cable also for unbalanced interconnects. In this case we recommend to only use 1 conductor (brown) for your signal and put all other wires or parts thereof to ground with the shields. This will increase your noise protection! However for unbalanced application we do have our perfect unbalanced wires 1001x, and 1000x.
Unbalanced Stereo & 2 Channels (loop) application:
We actually do not support the idea to use a a 2 conductor cable for stereo unbalanced wiring, however it will be done and can be made with accepable compromise regarding crosstalk and similar. Again all the shields to ground but not to the body shell of your connector. Check our perfect stereo cables 12001/13001 or our conductor shielded Starquad 11301 for real quality stereo wiring!
Solder we are using! Info Link
Our onlineshop is offline right now. Please inquire via Contact and avoid entering all datas, you can simply send us an email to email@example.com and we will quote with our ERP system. Link Contact