41310530 Hi-End Starquad audio interconnect cables for analoge audio (XLR)

Balanced analogue audio cables (Microphone leads) are built to protect the relative low-level signal from RF influences picked up at the cable runs.

Construction:

Wire: GAC-4/1 ultraPro 11301 


Starquad Cables:
Gotham "Star-Quad" cables are the most advanced microphone cables presently available. We have combined an ultraflexible PVC-jacket, low capacitive PE insulation, "double Reussen shielding" and quad (4-conductor) construction for a truly professional cable at an affordable price. The "Star-Quad" concept is known and recommended where the RF-rejection is the most important factor and where very long cable runs are needed. As we use each 2 conductors for low and high signal, we reduce the signal loss by 50% and due to the offset of the incoming RF-signal by the way the 4 conductors are twisted, the RF-rejection is over 130dB (25 kHz). The exclusive double shielding does its part of these features as well
Balanced 5 times shielded audio cable! Ultraflexible professional audio cable for microphones. 'Double Reussen shield', velvet matte non-light reflecting PVC-jacket material. Gold plated state of the art connectors (Neutrik NC3FXX/NC3MXX with large Cable clamp) are recommended by Gotham for this application. We solder leads with Gotham Cables and  Audio connectors at your choice. See below or inquire you speciallly made cable per Email 8,8 mm Ø, super flexible with unique additional shielding laywer to separate shield and conductors.  A unique construction new invented by Gotham design.)

Connectort:  Neutrik NCX3FXX / NCX3MXX (Pro-Serie with gold Contacts) XL strain releif -12mm.

Choice of color:
  • black,  nickel (Silver),  white
orther connectors on request. We can not use our normally recommended XLR from Switchcraft due to large cable diameter.
"ultimative Audio Cable!" Starquad 11301
conductorshielded
Neutrik
NCX3FXX / NCX3MXX black

 

Retail Prices / Ordering Information: July 2016

Order Nr. Cable type   Connector Length Price each +/- 1m
CHF  EUR CHF  EUR
41315030

GAC-4/1 ultraPro 11301 

11301
ultramarine blue

NCX3FXX / NCX3MXX black

3.0m 165.55 143.90 18.50 16.10
 


please ask for a quotation here: (link)   

Please indicate your address and details, indicate product and quantity and requested delivery date.




Starquad wiring instruction:
In order to benefit from the Starquad concept you need to wire the 4 conductors for you balanced audio cable as follows: (See wiring diagram below)
Bundle each opposite (Star) conductor together, we made colour code easy to identify the opposite conductor. (red/pink and white/ivory each belong together.)
Pin2= red&pink (Signal+),  Pin3= white&ivory (Signal -). Pin1= shield 1&2 =Ground
Put each a few strands of each layer of the shields together to ground Pin 1 should you not have space for all shielding strands.
Cut away any spare strands from the shields and secure that no loose strands are hanging around. Use a shrinking tube to avoid short circuits.
We do not recommend putting any ground to the body shell on either side of your XLR line. The connector shell will get to ground once plugged into a receptacle.
RCA/Phono/Jack unbalanced wiring:
Many clients use our 4 conductor cable also for unbalanced interconnects. In this case we recommend to only use 1 conductor (red) for your signal and put all other wires or parts thereof to ground with the shields. This will increase your noise protection! However for unbalanced application we do have our perfect unbalanced wires 1001x, and 1000x.
Stereo & 2 Channels application:
We actually do not support the idea to use a Starquad cable for stereo wiring, however it will be done and can be made with acceptable compromise regarding crosstalk and similar. If you use the cable as stereo line, use red/white for channel 1 and pink/ivory for channel 2. And again, all the shields to ground but not to the body shell of your connector.
Check our perfect stereo cables 12001/13001 or our conductor shielded Starquad 11301 for real quality stereo wiring!
 


Video "do it yourself" Konfektion Starquad auf XLR Stecker

-XLR Starquad mit 11001 auf QGP Stecker





 
QR-Code