Hybrid GAC 4/1 Double Shielded & 3 x 0.75mm² Single Shielded

Hybrid Audio/Power cable perfect to make interconnect leads for active loudspeaker systems/studio monitors.
We combine a double shielded starquad cableb similar to our 10921 with a shielded  power cable for 230VAC.
Our starquad construction will protect your genuine audio signal from possible RF-interferences transmitted from your mains power line.
Signal A: GAC 4/1mini  Signal side Staequad  10921 in PVC/PE

Construction: Star quad Audio Cable

1 = Jacket: PVC, Ø 6.5 mm / 0.26 in, grey (dark)
2 = Shield No. 1: Bare copper wires (0.10mm / 38 AWG) 100% coverage
3 = Shield No. 2: Bare copper wires (0.10mm / 38 AWG) 100% coverage
4 = Viscose fiber coat: Counter wrapped to the quad conductors
5 = Insulation: PE, Ø 1.2 mm / 0.05 in, white, red, pink and ivory quad twisted
6 = Conductor: Stranded bare copper wires 7 x 0.20mm (0.22mm²) / 7 x 24 AWG (23AWG)

Technical Datas:

Conductor resistance:   < 85 ohm/km / < 24.4Ohm/1000ft
Shielding resistance:   < 20 Ohm/km / < 6.1Ohm/1000ft
Capacitance: cond/cond: < 55 nF/km / < 16.8 nF/1000ft
  cond/shield: <105 nF/km / < 32nF/1000ft
Characteristic impedance: at 20 kHz: 80 ohm
Prüfspannung: cond/cond: 500 veff
  cond/shield: 2000 veff
Side B: 3 x 0.75mm² Single Shielded (11510) Power Cable

Application: Tree conductor signal line for high power.


1 = Jacket: PVC, Ø 6.5 mm / 0.26 in, grey (dark)
2 = Shield: Bare copper wires (0.10mm / 38AWG), 100% coverage
3 = Insulation: PVC, Ø 3.00mm / 0.12in high voltage tested
4 = Conductor: Stranded bare copper wires 24 x 0.20mm (0.75mm²) / 24x32AWG (19AWG)

Technical Datas:

Conductor resistance:   < 30 ohm/km / < 9.1 Ohm/1000ft
Shielding resistance:   < 30 ohm/km / < 9.1 Ohm/1000ft
Test voltage: cond/cond: 500 veff
  cond/shield: 2000 veff
Maximum Watts load: @ current 4.00 Ampere/Line < 500 Watt

Ordering Information:

Order No.
Spool Size
11510 Hybrid Cable 6.5 x 13.4 mm / 0.26x0.52in gray 100m/328ft 13.30 kg/30.9lbs 2x100m

Factory direct orders accepted. No minimum order! Simply inquire per email
please ask for a quotation here: (link)   

Gotham Retail USD Prices: Link

please ask for a quotation here: (link)   

Please indicate your address and details, indicate product and quantity and requested delivery date.
We also provice an orderform (Doc) you can complete and email or fax to us.

Starquad wiring instruction:
In order to benefit from the Starquad concept you need to wire the 4 conductors for you balanced audio cable as follows: (See wiring diagram below)
Bundle each opposite (Star) conductor together, we made colour code easy to identify the opposite conductor. (red/pink and white/ivory each belong together.)
Pin2= red&pink (Signal+),  Pin3= white&ivory (Signal -). Pin1= shield 1&2 =Ground
Put each a few strands of each layer of the shields together to ground Pin 1 should you not have space for all shielding strands.
Cut away any spare strands from the shields and secure that no loose strands are hanging around. Use a shrinking tube to avoid short circuits.
We do not recommend putting any ground to the body shell on either side of your XLR line. The connector shell will get to ground once plugged into a receptacle.
RCA/Phono/Jack unbalanced wiring:
Many clients use our 4 conductor cable also for unbalanced interconnects. In this case we recommend to only use 2 conductor (red/pink) for your signal and put all other wires or parts thereof to ground with the shields. This will increase your noise protection! However for unbalanced application we do have our perfect unbalanced wires 1001x, and 1000x.
Stereo & 2 Channels application:
We actually do not support the idea to use a Starquad cable for stereo wiring, however it will be done and can be made with acceptable compromise regarding crosstalk and similar. If you use the cable as stereo line, use red/white for channel 1 and pink/ivory for channel 2. And again, all the shields to ground but not to the body shell of your connector.
Check our perfect stereo cables 12001/13001 or our conductor shielded Starquad 11301 for real quality stereo wiring!