Hybrid Starquad Double Shielded & 3 x 1.50mm² Double Shielded Power Cable

Hybrid Audio/Power cable perfect to make interconnect leads for active loudspeaker systems/studio monitors.
We combine a double shielded starquad cable similar to our 41001 with a double shielded power cable 85015 for 230VAC.
Our starquad construction will protect your genuine audio signal from possible RF-interferences transmitted from your mains power line.
Signal A: similar to DGS 4/1mini, Signal side Starquad but enhanced shielding

Construction: Star quad Audio Cable

1 = Jacket: PVC, Ø 6.0 mm, black
2 = Shield No. 1: Bare copper wires (0.10mm) 100% coverage
3 = Shield No. 2: K6160 Polyester nonwoven thermally bonded, both sides copper coated (see below)
4 = Insulation: PE, Ø 1.2 mm, white, red, pink and ivory quad twisted
5 = Conductor: Stranded bare copper wires 7 x 0.20mm (0.22mm²) 7x32AWG = (24AWG)

Technical Datas:

Conductor resistance:   < 85 ohm/km
Shielding resistance:   < 20 Ohm/km
Capacitance: cond/cond: < 42 nF/km
  cond/shield: <120 nF/km
Characteristic impedance: at 20 kHz: 80 ohm
Rated Voltage Operating Voltage max. 100 Veff
Test Voltage   1200 Veff
Side B: 3 x 1.50mm² Double Shielded (85015) Power Cable

Construction: 3 x 1.50mm² Double Shielded (85015) Power Cable

1 = Jacket: PVC, Ø 7.6 mm, black
2 = Shield 1: Bare copper wires (0.10mm), 100% coverage
3 = Shield 2: K6160 Polyester nonwoven thermally bonded, both sides copper coated (see below)
4 = Drain Wire 16x0,19mmØ OFC
5 = Insulation: PE - 2YI1 , Ø 2.40mm high voltage tested,  Blue – Brown – Yellow/Green
6 = Conductor: 27x0,25mmØ "OFC" Cu 1,50mm² bare copper stranded
IEC 60228 Class 5 flexible copper conductor 1,50mm²

Technical Datas:

Conductor resistance:   < 13.3 ohm/km
Shielding resistance:   < 25 ohm/km
Rating voltage: @ current 9.0 Ampere/Line/ 950 Watt 250 V
Test Voltage:   2000 veff
Maximum Watts load: @ current 4.00 Ampere/Line < 500 Watt

Ordering Information:

Order No.
Spool Size
11615 Hybrid Cable 7.6 x 13.4 mm / 0.3x0.52in black 100m/328ft (H327) 16.50 kg/36.4 lbs 2x100m
New additional shield with K6160 Polyester nonwoven thermally bonded, both sides copper coated

K6160 Polyester nonwoven thermally bonded, both sides copper coated

Factory direct orders accepted. No minimum order! Simply inquire per email
please ask for a quotation here: (link)   

Gotham Retail USD Prices: Link

please ask for a quotation here: (link)   

Please indicate your address and details, indicate product and quantity and requested delivery date.
We also provice an orderform (Doc) you can complete and email or fax to us.

Starquad wiring instruction:
In order to benefit from the Starquad concept you need to wire the 4 conductors for you balanced audio cable as follows: (See wiring diagram below)
Bundle each opposite (Star) conductor together, we made colour code easy to identify the opposite conductor. (red/pink and white/ivory each belong together.)
Pin2= red&pink (Signal+),  Pin3= white&ivory (Signal -). Pin1= shield 1&2 =Ground
Put each a few strands of each layer of the shields together to ground Pin 1 should you not have space for all shielding strands.
Cut away any spare strands from the shields and secure that no loose strands are hanging around. Use a shrinking tube to avoid short circuits.
We do not recommend putting any ground to the body shell on either side of your XLR line. The connector shell will get to ground once plugged into a receptacle.
RCA/Phono/Jack unbalanced wiring:
Many clients use our 4 conductor cable also for unbalanced interconnects. In this case we recommend to only use 2 conductor (red/pink) for your signal and put all other wires or parts thereof to ground with the shields. This will increase your noise protection! However for unbalanced application we do have our perfect unbalanced wires 1001x, and 1000x.
Stereo & 2 Channels application:
We actually do not support the idea to use a Starquad cable for stereo wiring, however it will be done and can be made with acceptable compromise regarding crosstalk and similar. If you use the cable as stereo line, use red/white for channel 1 and pink/ivory for channel 2. And again, all the shields to ground but not to the body shell of your connector.
Check our perfect stereo cables 12001/13001 or our conductor shielded Starquad 11301 for real quality stereo wiring!