DGS-4/1 Single shielded 4 conductor "Star-Quad" Cable

DGS-4/1 (41001) Staquad Balanced single shielded analoge audio cable!
DGS "Star-Quad" cables are the most advanced single shielded microphone cables presently available. We have combined an ultraflexible PVC-jacket, low capacitive PE insulation, "Reussen shielding" and quad (4-conductor) construction for a truly professional cable at an affordable price. The "Star-Quad" concept is known and recommended where the RF-rejection is the most important factor and where very long cable runs are needed. As we use each 2 conductors for low and high signal, we reduce the signal loss by 50% and due to the offset of the incoming RF-signal by the way the 4 conductors are twisted, the RF-rejection is up to 130dB (25 kHz).

 

Construction:

1 = Jacket: PVC, Ø 4.7 mm / 0.19 in, black
2 = Shield: Tinned copper wires (0.10 mm / 38 AWG) 100 & coverage
3 = Viscose fiber coat.: Counter wrapped to the quad twisted element
4 = Insulation: PE, Ø 1.2 mm / 0.05 in, white, ivory, pink and red,quad twisted
5 = Conductor: Stranded bare copper wires 7 x 0.20 mm (0.22 mm²) / 7 x 32 AWG (24 AWG)
 

Technical Datas:

Conductor resistance:    < 85 ohm/km / < 25.9 Ohm/1000ft
Shielding resistance:    < 40 Ohm/km / 12.2 Ohm/1000ft
Capacitance: cond/cond:  < 40 nF/km / < 12.2 nF/1000ft
  cond/shield:  < 101 nF/km / < 30.8 nF/1000ft
Side circuit capacitance:   55 pF/km / 16.8 pF/1000ft
Side circuit capacitance:   135 pF/km / 41.2 pF/1000ft
Noise attenuation:    130 dB
Test voltage: cond/cond:  500 veff
  cond/shield:  2000 veff
Operating voltage:   Low voltage
Temperature range: flexi-installed: -5° to +50° C
  fix-installed: -30° to +70° C

Ordering Information:

Order No.
Type
Diameter
Colour
Spool
Weight/Spool
Shipping Unit
41001 DGS-4/1 4.5 mm / 0.18 in black 100m/328ft 3.75 kg / 8.3 lbs 4x100m

Retail Prices:

Order No. DGS single shielded
Cables
Length/
Spool metric
Length/
Spool
USCS
Color **Export shipping unit USD  (USCS) USD (metric)
per spool * per ft per spool * per meter
41001 DGS-4/1 100 m 328 ft black 4x100m 202.37 0.62 202.37 0.62

please ask for a quotation here: (link)   

Please indicate your address and details, indicate product and quantity and requested delivery date.





Starquad wiring instruction:
In order to benefit from the Starquad concept you need to wire the 4 conductors for you balanced audio cable as follows: (See wiring diagram below)
Bundle each opposite (Star) conductor together, we made colour code easy to identify the opposite conductor. (red/pink and white/ivory each belong together.)
Pin2= red&pink (Signal+),  Pin3= white&ivory (Signal -). Pin1= shield 1&2 =Ground
Put each a few strands of each layer of the shields together to ground Pin 1 should you not have space for all shielding strands.
Cut away any spare strands from the shields and secure that no loose strands are hanging around. Use a shrinking tube to avoid short circuits.
We do not recommend putting any ground to the body shell on either side of your XLR line. The connector shell will get to ground once plugged into a receptacle.
RCA/Phono/Jack unbalanced wiring:
Many clients use our 4 conductor cable also for unbalanced interconnects. In this case we recommend to only use 1 conductor (red) for your signal and put all other wires or parts thereof to ground with the shields. This will increase your noise protection! However for unbalanced application we do have our perfect unbalanced wires 1001x, and 1000x.
Stereo & 2 Channels application:
We actually do not support the idea to use a Starquad cable for stereo wiring, however it will be done and can be made with acceptable compromise regarding crosstalk and similar. If you use the cable as stereo line, use red/white for channel 1 and pink/ivory for channel 2. And again, all the shields to ground but not to the body shell of your connector.
Check our perfect stereo cables 12001/13001 or our conductor shielded Starquad 11301 for real quality stereo wiring!
 


Video "do it yourself" Konfektion Starquad auf XLR Stecker

-XLR Starquad mit 11001 auf QGP Stecker






 
QR-Code